| 引用本文: | 熊微,丁冠军,汪秋兰,汪梦蝶,张丽萍,施春阳,王文清.更昔洛韦氯化钠注射液与聚丙烯输液瓶的相容性评价[J].中国现代应用药学,2018,35(8):1166-1172. |
| XIONG Wei,DING Guanjun,WANG Qiulan,WANG Mengdie,ZHANG Luping,SHI Chunyang,WANG Wenqing.Compatibility Evaluation of the Ganciclovir and Sodium Chloride Injection and Polypropylene Infusion Bottle[J].Chin J Mod Appl Pharm(中国现代应用药学),2018,35(8):1166-1172. |
|
| |
|
|
| 本文已被：浏览 2572次 下载 1714次 |
码上扫一扫！ |
|
|
| 更昔洛韦氯化钠注射液与聚丙烯输液瓶的相容性评价 |
|
熊微,丁冠军,汪秋兰,汪梦蝶,张丽萍,施春阳,王文清
|
|
华中科技大学同济医学院附属同济医院药学部,武汉华龙生物制药有限公司,华中科技大学同济医学院附属同济医院药学部,华中科技大学同济医学院附属同济医院药学部,武汉华龙生物制药有限公司,华中科技大学同济医学院附属同济医院药学部,华中科技大学同济医学院附属同济医院药学部
|
|
| 摘要: |
| 目的 探讨聚丙烯输液瓶的安全性及其与更昔洛韦氯化钠注射液的相容性。方法 建立抗氧剂、抗酸剂的检测方法，通过提取试验、迁移试验和吸附试验研究注射液与包装材料的相互作用，根据添加剂的毒理学研究资料评价其相容性。结果 抗氧剂及其氧化物和降解物采用HPLC测定，报告限为0.098~0.98 μg·mL-1；抗酸剂中的镁、铝元素采用AAS测定，报告限为0.025~0.1 μg·mL-1。各添加剂的分析评价阈值为0.83~117 μg·mL-1，均高于各自报告限。提取和迁移试验中注射液中未检出添加剂成分，也未见API被明显吸附。结论 聚丙烯输液瓶浸出物含量低于每日允许最大暴露量，对更昔洛韦氯化钠注射液没有吸附作用，相容性好。 |
| 关键词: 聚丙烯输液瓶 更昔洛韦氯化钠注射液 提取试验 迁移试验 吸附试验 每日允许最大暴露量(PDE) 分析评价阈值(AET) |
| DOI：10.13748/j.cnki.issn1007-7693.2018.08.011 |
| 分类号:R927.11 |
| 基金项目: |
|
| Compatibility Evaluation of the Ganciclovir and Sodium Chloride Injection and Polypropylene Infusion Bottle |
|
Xiongwei,Ding Guanjun,Wang Qiulan,Wang Mengdie,Zhang Suping,Shi Chunyang and Wang Wenqing
|
|
Department of Pharmacy,Tongji Hospital,Tongji Medical College,Huazhong University of Science and Technology,Wuhan Hualong Bio-pharmaceutical Co,Ltd,Department of Pharmacy,Tongji Hospital,Tongji Medical College,Huazhong University of Science and Technology,Department of Pharmacy,Tongji Hospital,Tongji Medical College,Huazhong University of Science and Technology,Wuhan Hualong Bio-pharmaceutical Co,Ltd,Department of Pharmacy,Tongji Hospital,Tongji Medical College,Huazhong University of Science and Technology,Department of Pharmacy,Tongji Hospital,Tongji Medical College,Huazhong University of Science and Technology
|
| Abstract: |
| OBJECTIVE To investigate the safety of polypropylene infusion bottle and it's compatibility with the Ganciclovir and Sodium Chloride injection. METHODS The determination methods of antioxidants and antacids were established; the interaction on injection and packing materials were measured through extraction, migration and adsorption test; and the compatibility was evaluated by the reported toxicology research data of additives. RESULTS The antioxidants and their oxides and/or degradation products were determined by HPLC, and their reporting thresholds were 0.098-0.98 μg·mL-1. The contents of Mg and Al in the antacids were determined by AAS, and their reporting thresholds were 0.025-0.1 μg·mL-1. While the analytical evaluation thresholds of each additives were 0.83-117 μg·mL-1, it was higher than their respective reporting threshold. In the extraction and migration experiments, no additive and obvious adsorption of API were found in the injection. CONCLUSION The extracts of polypropylene infusion bottles are lower than their permitted daily exposure. The packing material does not adsorb Ganciclovir and Sodium Chloride injection and has good compatibility. |
| Key words: polypropylene infusion bottle Ganciclovir and Sodium Chloride injection extraction study migration study adsorption study permitted daily exposure(PDE) analytical evaluation threshold(AET) |
|
|
|
|
