| 引用本文: | 邓亚伟,刘明松,李欣浓,李春花,忻晓东.基于Plackett-Burman结合Box-Behnken优选经典名方三化汤挥发油β-环糊精包合工艺[J].中国现代应用药学,2023,40(19):2669-2676. |
| DENG Yawei,LIU Mingsong,LI Xinnong,LI Chunhua,XIN Xiaodong.Screen the Volatile Oil β-Cyclodextrin Infused Process of the Classic Prescription Recipe Sanhua Decoction Based on Plackett-Burman Combined with Box-Behnken[J].Chin J Mod Appl Pharm(中国现代应用药学),2023,40(19):2669-2676. |
|
| 本文已被：浏览 798次 下载 483次 |
码上扫一扫！ |
|
|
| 基于Plackett-Burman结合Box-Behnken优选经典名方三化汤挥发油β-环糊精包合工艺 |
|
邓亚伟1, 刘明松1, 李欣浓1, 李春花1,2,3,4, 忻晓东1
|
|
1.河北中医药大学药学院, 石家庄 050200;2.河北省高校中药组方制剂应用技术研发中心, 石家庄 050091;3.河北省中药组方制剂技术创新中心, 石家庄 050091;4.河北省中药制剂产业技术研究院, 石家庄 050000
|
|
| 摘要: |
| 目的 优化经典名方三化汤挥发油饱和水溶液法包合工艺。方法 以β-环糊精为包合材料，通过Plackett-Burman结合Box-Behnken设计试验，筛选三化汤总挥发油最佳包合工艺。采用显微镜法、薄层色谱法、紫外分光光度法对包合物进行验证，顶空-气相色谱-质谱联用确定包合前后挥发性成分变化。结果 经典名方三化汤总挥发油最佳包合工艺为转速2 000 r·min-1、包合1 h、料液比1∶10、包合温度30 ℃、物料比1∶9。3次验证实验的综合评分分别为0.981 0，0.999 9，0.963 4，平均值为0.981 4，与模型预测值相差2.87%。结论 饱和水溶液法包合工艺简单、稳定，挥发性成分包合前后基本不变，为三化汤开发及经典名方中挥发油包合工艺研究提供参考。 |
| 关键词: 经典名方 三化汤 挥发油 饱和水溶液法 顶空-气相色谱-质谱联用 |
| DOI：10.13748/j.cnki.issn1007-7693.20223429 |
| 分类号:R943 |
| 基金项目:河北省重点研发计划项目(19272502D)；2022年省属高校基本科研业务费项目(YXTD2022005) |
|
| Screen the Volatile Oil β-Cyclodextrin Infused Process of the Classic Prescription Recipe Sanhua Decoction Based on Plackett-Burman Combined with Box-Behnken |
|
DENG Yawei1, LIU Mingsong1, LI Xinnong1, LI Chunhua1,2,3,4, XIN Xiaodong1
|
|
1.College of Pharmacy, Hebei University of Chinese Medicine, Shijiazhuang 050200, China;2.Hebei Higher Education Institute Applied Technology Research Center on TCM Formula Preparation, Shijiazhuang 050091, China;3.Hebei Technology Innovation Center of TCM Formula Preparations, Shijiazhuang 050091, China;4.Hebei Industrial Technology Institute for Traditional Chinese Medicine Preparation, Shijiazhuang 050000, China
|
| Abstract: |
| OBJECTIVE To optimize the cladding process of volatile oil saturated and aqueous solution method of classic prescription Sanhua decoction. METHODS β-Cyclodextrin was used as the wrapping material, through Plackett-Burman combined with Box-Behnken design tests, the optimal packaging process of Sanhua decoction’s total volatile oil was screened. The clathrate was verified by microscopy, thin layer chromatography, and ultraviolet spectrophotometry, and the change of volatile composition before and after the envelope was determined by headspace-gas chromatography-mass spectrometry. RESULTS The best coating process of the total volatile oil of the classic prescription Sanhua decoction was as follows: speed 2 000 r·min-1, wrapping 1 h, feed-liquid ratio 1∶10, baling temperature 30 ℃, material ratio 1∶9. The comprehensive scores of the three validation experiments were 0.981 0, 0.999 9 and 0.963 4, and the average value was 0.981 4, which was 2.87% different from the predicted value of the model. CONCLUSION The saturated aqueous solution method is simple and stable, and the volatile components are basically unchanged before and after the encapsulation, which provides a reference for the development of Sanhua decoction and the research on the volatile oil in the classic recipe. |
| Key words: classic prescription Sanhua decoction volatile oil saturated aqueous solution method headspace-GC-MS |
