• 首页期刊简介编委会刊物订阅专栏专刊电子刊学术动态联系我们English
引用本文:李辉,马仕洪,王似锦,绳金房,田斌.基于水分活度的非无菌中药制剂微生物控制策略研究[J].中国现代应用药学,2022,39(1):55-60.
LI Hui,MA Shihong,WANG Sijin,SHENG Jinfang,TIAN Bin.Study on Microbiological Control Strategy of Non-sterile Traditional Chinese Medicine Preparation Based on Water Activity[J].Chin J Mod Appl Pharm(中国现代应用药学),2022,39(1):55-60.
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 1441次   下载 790 本文二维码信息
码上扫一扫!
分享到: 微信 更多
基于水分活度的非无菌中药制剂微生物控制策略研究
李辉1,2, 马仕洪3, 王似锦3, 绳金房4, 田斌1
1.陕西科技大学食品与生物工程学院,西安 710021;2.陕西盛德泰林生物安全技术检测有限公司,西安 710065;3.中国食品药品检定研究院,北京 100050;4.陕西省药品技术审评中心,西安 710065
摘要:
目的 建立基于水分活度(aw)的非无菌中药制剂微生物控制策略。方法 测定11种中药剂型的水分活度分布,采用水分活度为0.328,0.529,0.753,0.902,0.973的条件下放置的方法分析胶囊剂、丸剂等中药制剂水分活度和需氧菌总数、霉菌及酵母菌总数的变化规律,建立中药制剂的微生物控制策略。结果 在GMP条件下生产的中药制剂,可根据aw将非无菌中药制剂分为4类,评估微生物生长繁殖风险,采取科学的微生物控制策略。一类产品aw≥0.90,进行TAMC,TYMC以及该剂型规定的控制菌和其他具有潜在危害的微生物测试;二类产品0.90 > aw≥0.85,进行TAMC,TYMC和金黄色葡萄球菌测试;三类产品0.85 > aw≥0.60,进行TAMC、TYMC测试;四类产品aw < 0.60,可结合风险评估,逐步研究减少测试的控制方案。结论 基于水分活度的中药制剂分类控制策略为微生物控制提供了新思路,在降低中药制剂生物负载的前提下,可通过控制水分活度降低中药制剂生产、运输、储存等过程的微生物生长繁殖风险,进而提高非无菌中药制剂的微生控制水平。
关键词:  中药制剂  水分活度  微生物污染  微生物控制  质量控制
DOI:10.13748/j.cnki.issn1007-7693.2022.01.009
分类号:R283.1
基金项目:陕西省重点研发计划项目(2019SF-062,2020SF-310)
Study on Microbiological Control Strategy of Non-sterile Traditional Chinese Medicine Preparation Based on Water Activity
LI Hui1,2, MA Shihong3, WANG Sijin3, SHENG Jinfang4, TIAN Bin1
1.School of Life Science and Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China;2.Shaanxi Sheng De Tai Lin Biological Safety Technical Testing Co., Ltd., Xi'an 710065, China;3.National Institutes for Food and Drug Control, Beijing 100050, China;4.Shaanxi Center for Drug Evaluation, Xi'an 710065, China
Abstract:
OBJECTIVE To establish a microbiological control strategy for non-sterile Chinese medicine preparations based on water activity(aw).METHODS The water activity and the total number of aerobic bacteria of 11 kinds of traditional Chinese medicines(TCM) were measured by the method of placing samples under series of water activity conditions 0.328, 0.529, 0.753, 0.902, 0.973, the water activity distribution and the change rule of the total number of molds and yeasts of 11 kinds of Traditional Chinese Medicines was figure out.RESULTS TCM preparations produced in GMP conditions could be classified into 4 categories according to aw, assessing the risk of microbial growth and reproduction, and adopting scientific microbial control strategies. For the first type of product aw≥0.90, test TAMC, TYMC and the prescribed control bacteria and other potentially harmful microbial tests, for the second type of product 0.90 > aw≥0.85, test TAMC, TYMC and Staphylococcus aureus test, for the third type of product 0.85 > aw≥0.60, test TAMC and TYMC, for the fourth type of products aw < 0.60, could be combined with risk assessment, and gradually study the control plan to reduce the test.CONCLUSION The classification of TCM preparations based on aw provides new ideas for microbial control. Under the premise of reducing the bioburden of TCM preparations, the risk of microbial growth and reproduction during the production, transportation, and storage of TCM preparations can be reduced by controlling the aw, thereby increasing the level of microbiological control of non-sterile TCM preparations.
Key words:  Traditional Chinese medicine preparations  water activity  microbial contamination  microbial control  quality control
扫一扫关注本刊微信